• Verzendkosten € 6,95 (gratis va €50,-)
  • Scherpste prijzen tot wel 70% korting !
  • Veilig kopen met CBW keurmerk
Lecol PVC Remover OH55 -action-
PVC Remover OH55 -action- €12,95 €30,00

Lecol PVC Remover OH55 -action-

Sale
€30,00 €12,95 (incl. btw)
(excl. btw €10,70)
In stock: Ordered before 18 is shipped today
  • Buy 3 for €12,82 each and save 1%
  • Buy 12 for €12,69 each and save 2%
  • Buy 60 for €12,56 each and save 3%
Article number: 11871
EAN: 4014701622764
  • Mo/Fr ordered before 18.00 is shipped directly
  • Laagste prijs tot wel 75% korting !
  • Houtafwerkingsspecialisten sinds 1976
  • Grootste voorraad van de Benelux (+1000m2)
  • Reeds 200.000+ tevreden klanten
Information

Lecol PVC Remover OH55,

If your PVC floor is heavily soiled, for example due to a party or overdue maintenance, it is best to thoroughly clean the floor with the Lecol PVC Remover OH55. This is also the pre-treatment for applying a new polish layer. Even when dull spots have arisen and the floor could use a refresher, it is wise to use this PVC Polish remover before applying a new layer of polish.

Lecol PVC Remover OH55 is a water-dilutable intensive cleaner. Lecol PVC Remover OH55 degreases the floor and ensures that a new polish layer adheres well.

Application
Lecol PVC Remover OH55 is suitable for heavily soiled PVC and Vinyl floors that are resistant
against water. Lecol PVC Remover OH55 is also suitable as a soil cleaner due to its low pH value
to use linoleum.

Technical data and Specifications,
Drying time: +/- 1 hour
Material consumption: 1 liter for 4 to 10 liters of water for 100 m², depending on the pollution
of the PVC or Vinyl floor.
Shelf life and storage: Can be stored frost-free in original, closed packaging for approx. 36 months.
Contains: Non-ionic surfactant, water-soluble solvent, fragrances and
binding agent.
pH-Value: Concentrated 7
Material consumption: 1 liter on 4 to 10 liters of water for 100 m², depending on the pollution. Contains: Anionic - non-ionic surfactant, binding agent and fragrances and binding agent.

Instructions,

  1. Before you get started with this product, you should always shake it well. In addition, it is important to always apply this product diluted. (Never use undiluted!) The mixing ratio depends on the type of PVC and the pollution of the PVC or vinyl floor. We recommend that you stay between 1:4 and 1:10 in terms of mixing ratio.
  2. You can then edit the floor in sections. Apply Lecol PVC Remover diluted with an old well-wrung mop or cloth and let it soak for about 5 minutes.
  3. You can then scrub the floor by hand with a Boenpad in combination with a green pad (see below). Avoid cleaning the PVC or Vinyl floor too wet.
  4. Then remove the dissolved dirt and repeat this until you have covered the entire floor.
  5. Then wipe the entire floor with a slightly damp cloth and let it dry completely.
  6. Then you need to apply a new layer of Lecol PVC Polish OH51 .
  7. It is also possible to clean the floor mechanically, for the best result this is the best option. You can do this with a Floor Polisher in combination with a green pad. You can then scrub the floor by first applying the remover with a mop or mop. Then you can get started with the floor polisher and green pad. Please note that it is important not to clean the floor too wet and remove the dissolved dirt in between. Repeat this operation until the entire floor has been treated. Then wipe the entire floor slightly damp with clean water and let it dry completely. Finally apply a new layer of Lecol PVC Polish OH51 .

Maintain Lecol PVC Remover OH55

After you have treated the floor with the remover and applied the new layer of polish, you can clean the floor weekly with Lecol PVC Cleaner OH59 .

--TECHNICAL INFORMATION--

Reviews
No reviews found
Read or write a review
parketenmeer.nl
CBW
By using our website, you agree to the usage of cookies (your privacy is respected) Hide this message More on cookies »
← .    DUE TO LARGE AMOUNT OF ORDER THE DELIVERY TIME IS SET TO 1 TO SEVERAL DAYS . Hide