Lecol PVC Polish OH 51 -action-
- Buy 3 for €25,63 each and save 1%
- Buy 6 for €25,37 each and save 2%
- Buy 12 for €25,11 each and save 3%
| Article number: | 11868 |
| EAN: | 4014701622757 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Lecol PVC Polish OH51,
Lecol PVC Polish OH51 is suitable for maintaining your new PVC or Vinyl floor. You can also refresh your old floor in combination with Lecol PVC Remover OH55 and remove dull spots / treads. The polish provides the floor with a protective film which makes the floor very resistant to mechanical stress, repellent to dirt and rubber stripes and is smudge-proof.
- Consumption: approx. 1 liter per 30 to 35 m2
- Drying time: approx. 30 minutes per coat
- For best results, clean first withLecol PVC Remover OH55
- Apply with the mop from the Opti Set (see below)
Is a water-based maintenance product based on specially modified aqueous polyurethane dispersions for PVC and Vinyl floors. Gives a matte end result.
Application
Lecol PVC Polish OH 51 is suitable for new PVC and Vinyl floors.
Technical data
Drying time: Per coat: approx. 30 minutes.
Material consumption: Depending on the type of substrate: approx. 30 ml/m2.
1 liter approx. 30-35 m2/layer.
- Material consumption: depending on the type of substrate: approx. 30 ml/m2 - 1 liter approx. 30-35 m2/layer.
- Cleaning tools: Rinse with clean water immediately after use.
- Contains: Less than 5% anionic surfactant, preservative, polymer dispersions, water soluble solvent
- Shelf life and storage: Can be stored frost-free in original, closed packaging for approx. 36 months.
Instructions,
- The substrate must be clean, dry, free of dust, grease and wax. Old floors must first be thoroughly cleaned with Lecol PVC Remover OH55 , so that they are absolutely clean, free of grease and wax. Afterwards rinse with clean water.
- Due to the versatility of substrates, a test surface must be carried out and tested for adhesion. With new floors, you must first wait at least 14 days and we recommend that you first clean the floor with Lecol PVC Cleaner OH59 .
- When the polish layer becomes dull or when treads appear, you can apply a completely or partially new layer of Lecol PVC Polish OH51 undiluted. Please note: applying the 1st layer of Lecol PVC Polish OH51 can only take place 14 days after placing your PVC or Vinyl floor!
- Shake the Lecol PVC Polish OH51 well before use. Apply the undiluted Polish evenly to a completely dry floor with a special mop from the Opti Set (see below). Prevent puddles.
Warning: Never use Lecol PVC Polish OH51 on a floor that has been treated with another maintenance product.
Maintenance Lecol PVC Polish OH51
After the floor has been treated with the polish, you should wait at least 1 day before cleaning it further. You can then do this with Lecol PVC Cleaner OH59 . This product can then be used for weekly cleaning. When the floor eventually needs a new polish layer, you should first clean the floor with Lecol PVC Remover OH55 and then repeat the polish treatment again.
