Woca Color oil Antique no 349
Article number: | 11430 |
EAN: | 5708055011266 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
Woca Color Oil Antique no 349, (Master Color Oil)
Woca Color Oil (Colour Oil) gives wooden floors a beautiful natural look. Color oil is available in 12 different colors. The color oil can be applied directly to the untreated wood in 2 layers. The oil colors, penetrates deep into the wood and provides a strong, dirt and water resistant surface. The oil accentuates the natural wood structure.
Color Oil is color and protection in one product. In combination with pre-treatments such as lye, many new color options are created. Color Oil enhances the color and structure of the wood. Therefore, always do a test first to see whether the result on the type of wood to be treated is satisfactory. Master Color Oil is applied in 2 layers.
Wipe wood beforehand with a cloth in a solution of Woca Intensive Cleaner (1:40 with water). Then let the wood dry thoroughly. Apply evenly with a brush or roller and leave it on for 20 minutes. Rub in with our hand pads or single-disc polishing machine, rub dry with cotton cloths (for everything see below or else here for the total range of special polishing pads for Woca oil...)
After 6-8 hours, buff the treated surface with a small amount of Master Color Oil (color or natural, whichever you prefer) to completely saturate the wood.
Consumption: 1 liter per ± 10m²
Drying time: approx. 24 hours
Apply Manually:
1. Apply tat with our paint rollers or brushes (see below under related products). Apply color oil evenly on a maximum of 5 m2 floor area. Never use a cheap hardware store roll or brush, this will not make the result beautiful.
Continue to distribute the oil for 20-25 minutes so that no chapped spots remain and an even, thin gloss layer is created everywhere. Pay extra attention to knots and other highly absorbent areas. Depending on the type of wood, the consumption is approximately 1 liter of oil for 10-15 m2.
2. Then scrub the oil into the wood with a green or red pad until the pores of the wood are saturated and the floor no longer absorbs oil.
3. Now dry the treated surface of the floor well with our cotton cloths (see again below). Always brush away footsteps immediately.
- 1-View all colors neatly together...
- 2-NEW: HERE YOU WILL FIND ALL INSTRUCTION VIDEOS FOR ALL WOCA PRODUCTS...
- 3-TECHNICAL INFORMATION..
- 4-BROCHURE..
- -CLICK HERE FOR THE WOCA MAINTENANCE PLAN-
Cleaning and maintenance,
1, Annually: Apply Woca maintenance oil for protection and nourishment.
2. Monthly / 2 monthly: treat with Woca Natural Soap. Natural soap forms a protective layer on the surface, which reduces wear and stains, etc.
3. Weekly or as often as you like: Regularly mop the floor with the Eco Multi Cleaner, with this you remove all the dirt and the floor remains wonderfully fresh and clean and you prevent damage due to caked dirt, stains, circles, etc.
4. You can easily order these materials here...