Osmo Buitenhout Wood Degreaser Power Gel 6609
| Article number: | 11526 |
| EAN: | 4006850642182 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Hout Afwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 300.000+ tevreden klanten
Osmo Wood Grayer Power Gel 6609,
Powerful cleaner for refreshing and cleaning weathered exterior wood. The sun's high-energy UV rays destroy the look of the wood: it turns grey over time. Osmo Wood De-greaser Power Gel has been specially developed to restore the wood to its original color and character. Easy to apply with a brush, even on vertical surfaces, thanks to the non-drip formula. The deep penetrating effect of the gel is most effective on untreated surfaces, with results visible within just 30 minutes!
Please note, the 5-liter and 10-liter sizes are more liquid; only the 0.5 and 2.5 liters are gel.
Features Osmo Power Gel 6609,
- Liquid Special Cleaner, for outdoor use
- Restores the natural properties of untreated wood
- Revive the fresh, warm color tones of wood – make them visible again
- Quick and easy to use
- Odorless and biodegradable
- Looking for a general patio cleaner? Check out Osmo Patio Cleaner!
- Special cleaning agent for refreshing and cleaning grayed wood
- Suitable for patios, decking and cladding, furniture, etc.
- The natural character returns after the treatment.
- Instructions for use: Mix undiluted or with water, depending on the degree of graying. After an application time of approximately 15 minutes, remove the discoloration with a brush and plenty of water. After thorough drying, a layer of one of the Osmo oils is recommended.
- Available in 0.5 liters / 2.5 liters (with brush) and 25 liters (on order)
- 1 liter is sufficient for approx. 10-30 m2 (depending on weathering)
Instructions for use Osmo Power Gel 6609,
1. Brush away heavy contamination
2. Recreate the surface with water
3. Apply material to the greyed wood (approx. 100 ml/m²)
4. After the contact time (min. 20 minutes), brush out with a stiff brush or scrubber and plenty of water. The second coat can be applied after approximately 48 hours (at 23 degrees/50% relative humidity). Drying takes longer at lower temperatures or higher humidity. Good ventilation must be ensured at all times.
5. Subsequently protect the surfaces with Osmo wood oil for outdoor use.
1 liter is approximately sufficient for 10-20 m² with one coat.
