Osmo Intensive Cleaner 8019 (choose your content),

Product description;
Ideal for intensive cleaning of oiled and waxed surfaces. For surface treatment with Osmo finishes.

Usage;
Ideal as an alternative to sanding on all oiled and waxed wooden surfaces such as wooden floors, furniture, but also plastics, stainless steel, and other waterproof surfaces.

Preparation: Remove loose dirt from the surface with a broom or hand brush. Dilute the concentrate 1:10 to 1:20 with water. Test the product on the surface first.

To apply;
Apply the diluted cleaner to the contaminated surface (possibly using a green pad) with a mop. Remove the dirt and then rinse with clean water. Remove the dirt with an Osmo mop or a lint-free cotton cloth. Treat oiled or waxed surfaces with the appropriate Osmo finish after drying, such as Osmo hardwax oil or maintenance oil.

Note;
Do not use undiluted. May cause discoloration or surface changes on unfamiliar surfaces. Woods rich in active ingredients (especially oak) will darken after contact with undiluted intensive cleaner. Even if diluted, always test the product on an inconspicuous area. Prevent the concentrate from drying. Not suitable for daily maintenance.

NB:
Contains Disodium metasilicate. Causes skin irritation. Causes serious eye irritation. Keep out of reach of children. Read label before use. Wear protective gloves/eye protection. If on skin; wash with plenty of water. If in eyes; rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. If medical advice is needed, have product container or label at hand. Reacts with acids, generating heat. Risk of splashing! The usual precautions for handling chemicals should be observed.

Consumption:
1 litre is sufficient for approximately 30-100m2 with one coat, depending on the degree of contamination.