Stauf Repamed (For hollow spots),

Solvent-free, one-component liquid polyurethane adhesive.

This handy injection needle, filled with a one-component PU fluid, easily fills hollow spots without breaking. A practical product: it is ready to use, easy to apply, and causes minimal damage due to the use of an injection needle. It is suitable for underfloor heating, is low-emission, and refillable with VPU-155.

Technical info..

A 4 mm drill diameter is sufficient for drilling and filling STAUF Repamed. To fill STAUF Repamed, the syringe is positioned perpendicular to the drill hole, and the liquid repair compound is sprayed evenly under the parquet at steady pressure. Repeat accordingly for multiple drill holes. Immediately remove any material rising from the drill holes. If a smaller drill diameter is desired, or for spraying behind edge trim/skirting boards, the supplied needle can be attached. The areas to be sprayed must be sufficiently weighted down, as the repair compound may foam slightly during hardening and potentially push the parquet upwards. After 24 hours, the tapes can be removed and the drill holes sealed with hot wax, wood filler, or other suitable products.

Special features Stauf Repamed,

• filling hollow spaces
• re-gluing / repair

Permitted substrates,

Concrete C 25 / 30 according to DIN 1045 (rough surface)

Calcium sulfate (anhydrite) screeds

Plank floors

Particle boards (P4 to P7), OSB (OSB/2 to OSB/4)

Uncoated plasterboard

Cement screeds

Scope of application ,

for effortlessly eliminating hollow spots or for gluing loose parts in place afterwards

Product features Stauf Repamed,

- suitable for underfloor heating

- ready for use

- good adhesion to various materials

- without solvents