SKYLT Intensive Cleaner #9150 is a powerful, professional-grade cleaner specifically designed for thoroughly cleaning wooden floors finished with SKYLT lacquer. This highly concentrated cleaner is ideal for periodic maintenance, but also perfectly suited for tackling stubborn dirt, streaks, grease stains, and old polish. This intensive floor cleaner isn't a daily cleaner; it's a technical cleaner for heavy-duty cleaning and prep work. For example, degreasing a floor before applying a new coat of lacquer or polish, or removing accumulated dirt and dull spots from heavily used areas of the floor.

SKYLT Intensive Cleaner #9150 comes in a 1-liter bottle and should always be used diluted. Depending on the level of contamination, mix 1 liter with 5 to 10 liters of cold or lukewarm water. Important: always add the water first, then the cleaner, to prevent foaming. If you're working on large surfaces or need to remove old polish, scrubbing is the best approach. Use a single-disc machine with a beige or red pad. Coarser pads or brushes are not recommended, as they can scratch or leave an undesirable sheen on the matte SKYLT paint.

For smaller or less dirty areas, mopping is sufficient. You can also target localized stains. Always work in sections of 6 to 10 square meters at a time. Apply a thin layer of soapy water with a mop or spray bottle, let it work briefly, but never dry. Then, mop or scrub vigorously with plenty of soapy water under the pad or cloth. Work carefully, especially along the edges where polish often accumulates. Remove the dirty water immediately with a wet vacuum cleaner or lint-free cotton cloths. Always rinse thoroughly with clean water afterwards until the rinse water runs clear. Remember to change the rinse water regularly and replace dirty cloths with clean ones. Finally, let the floor dry completely – including in the cracks and crevices – before applying a new finish.

The SKYLT Intensive Cleaner dries within 1 to 2 hours at room temperature, depending on the humidity and ventilation. Once the floor is dry, you can immediately proceed with, for example, SKYLT Polish or a new coat of varnish. If the floor still feels soft or a little sticky, wait at least eight hours. Important: for a new coat of varnish, you must first sand it with P120 grit sandpaper. This is not necessary for a new coat of polish.

This floor cleaner is intended for indoor use and is transparent. It covers approximately 40 square meters per liter, depending on the dilution and application method. Store the cleaner in a cool, dry place, tightly closed—but always frost-free. When used correctly, it's a reliable, effective, and safe product. Always wear protective clothing, gloves, and safety glasses when using it, especially when scrubbing or using a spray bottle. Pay attention to your walking route and protect vulnerable surfaces around it.

Do not use SKYLT Intensive Cleaner on moisture-sensitive subfloors and never use a steam cleaner. For daily cleaning, use a mild floor cleaner instead of an intensive cleaner. Prevent damage from sand and dirt with good entrance mats and protect furniture with felt pads. Don't leave spilled liquid lying around. By following these guidelines, you'll keep your wood floor in top condition, ready for years of use and beauty.