Tisa-Line Parquet spring 18mm X-shape Top quality
- Buy 250 for €0,89 each and save 10%
- Buy 500 for €0,79 each and save 20%
- Buy 750 for €0,69 each and save 30%
- Buy 1000 for €0,59 each and save 40%
| Article number: | 13294 |
| EAN: | 8718074854123 |
- soon available
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Parquet spring 18mm X-shape Top quality, NOW SUPER ACTION!
** on = on last pieces.
Special X-shaped parquet springs are placed between the (floating) floor and the wall.
They keep the floor under tension so that seam formation is minimized.
Usually, the parquet springs are only placed on the long side every 30 to 40 cm.
The ends of the floorboards must be glued with our seam adhesive, see below.
Quantity: box is 50 pieces
Size: 18mm high
Instructions for use: Always place tension springs every 30 to 40 cm between the wall and the planks.
In this way, the tension springs provide optimum pressure to keep the floor closed without seams and cracks. This product is therefore ideal for laying all wooden or plastic planks without seam glue.
Application: Parquet springs in X shape,
12mm is used for laminate and wooden floors of 10-17mm thickness and,
18mm for 18 to 22mm floor thickness.
MINIMUM ORDER 50 PIECES IS 1 BOX (so you can also make 51 pieces or more, but not less).
