Lecol Master Polish V6 Gloss -action-
- Buy 3 for €23,03 each and save 2%
- Buy 12 for €22,33 each and save 5%
- Buy 60 for €21,86 each and save 7%
| Article number: | 10994 |
| EAN: | 4014701002955 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
Lecol Master Polish V6 Gloss
Lecol Master Polish is a very strong polish suitable for lacquered parquet floors. This polish provides the floor with a highly elastic protective film, making the floor very resistant to mechanical loads, dirt and rubber stripes and it becomes repellent and smudge-proof. This polish is solvent-free and based on a special polyurethane acrylic dispersion. This keeps your floor in good condition, especially with regular use.
- Consumption: approx. 1 liter per 30 - 35 m2
- Also available in a matte version
- For best results, clean first with Lecol Remover OH45
- Apply with the Polish Mop from the Opti Set (see below).
- The wear-resistant protective layer for all varnished parquet floors.
Instructions,
- Old floors must first be thoroughly cleaned with Lecol Remover OH45, so that they are absolutely clean, free of grease and wax.
- Afterwards rinse with clean water. Make sure that you do not use too much water for this and that the floor is not soaked.
- Due to the versatility of substrates, we recommend that you apply a test area and test for adhesion.
- Apply Lecol Easy Master Polish undiluted to a completely dry floor evenly with a clean lint-free cloth with the Polishmop from the Opti Set (see below). Prevent the formation of puddles as well as the formation of foam and air bubbles. NB! Let the floor dry completely. Do not rub. The floor can be walked on after approximately 30 minutes.
Maintain Lecol Master Polish glossy
If the polish becomes dull over time or the appearance of treads, apply a completely or partially new layer undiluted. In addition, you can clean the floor weekly with Lecol Clean OH49
Specifications Lecol Master Polish glossy
- Drying time: approx. 30 minutes per coat
- Consumption: Depending on the type of substrate: approx. 30 ml/m2 / 1 liter approx. 30-35 m2/layer
- Cleaning tools: Rinse with clean water immediately after use.
- Post-processing and maintenance: If post-processing is necessary, the floor should be cleaned with Lecol Remover OH45 (see technical data sheet Lecol Remover OH45). Then rinse the floor with clean water, let it dry and then apply a new polish.
- Storage: always keep frost-free above 5ºC in original packaging.
Product description : General Solvent-free polish based on specially modified aqueous polyurethane acrylate dispersions. The Leha Master Polish V-6 is available in a matte or glossy version.
Properties
The polish provides the floor with a highly elastic protective film, is very resistant to mechanical loads, repels dirt and rubber stripes and is smudge-proof.
Application ,
Suitable for all varnished parquet floors.
Price is for 1 Ltr. consumption 1 Ltr/35m2.
