Lecol Easy Polish OH 41 Extra Matt,

Lecol Easy Polish OH41 is a solvent-free finish based on special water-based
synthetic resin dispersions. Lecol Easy Polish OH-41 is matt gloss and non-slip. Lecol Easy Polish OH-41 is
highly resistant to mechanical loads, repels dirt and rubber marks, smudge-proof.

Technical data Lecol Polish OH41,

Drying time: Per layer: approx. 30 minutes.
Material consumption: Depending on the type of substrate: approx. 30 ml/m2.
Cleaning tools: Rinse with clean water immediately after use.
Cleaning and maintenance: Clean the treated floor with Lecol Clean OH49.

Post-treatment and maintenance: If post-treatment is necessary, clean the floor with Lecol Remover OH45 (see Lecol Remover OH45 technical data sheet).
Then rinse the floor with clean water, allow to dry and then apply Lecol Easy Polish OH41 (see also application point).

Subsurface,
The surface must be clean, dry, dust, grease and wax free.
Old floors must first be thoroughly cleaned with Lecol Remover OH45, so that they are absolutely
Clean, grease-free, and wax-free. Rinse with clean water afterwards.

To raise,
To protect a new coat of paint (after 14 days): Lecol Easy Polish OH41 undiluted on
Apply evenly to a completely dry floor using a clean, lint-free cloth or a special polish distributor.
Prevent the formation of puddles as well as the formation of foam and air bubbles.

If the Lecol Easy Polish OH41 becomes dull or if tread marks appear, a whole or
Apply a partially new layer undiluted.
Can also be used diluted with water in a ratio of 1:5 or 1:10. Never use too much.
water and immediately absorb any excess.

The environmentally friendly matt polish for lacquered floors,

Product description Lecol Polish OH41:

General Solvent-free polish based on matt water-based polymer dispersions.
Properties ,
Leha Easy Polish OH-41 extra matt is highly resistant to mechanical stress, repels dirt and rubber marks, and is smudge-proof.
Application,
On all lacquered parquet floors 1 Ltr/30m2 consumption.

--TECHNICAL INFORMATION--