Woca Color Oil Rhode Island Brown no. 106, (Master Color Oil)

Woca Colour Oil gives wooden floors a beautiful natural look. Colour Oil is available in 12 different colours. The colour oil can be applied directly to the untreated wood in 2 coats. The oil colours, penetrates deep into the wood, and creates a strong, dirt- and water-repellent surface. The oil accentuates the natural wood structure.

Colour Oil is color and protection in one product. In combination with pre-treatments such as lye, many new color possibilities emerge. Colour Oil enhances the color and structure of the wood. Therefore, always perform a test first to see if the result on the type of wood to be treated is satisfactory. Master Colour Oil is applied in 2 coats.

Wipe the wood beforehand with a cloth soaked in a solution of Woca Intensive Cleaner (1:40 with water). Allow the wood to dry thoroughly. Apply evenly and cover thoroughly with a brush or roller and let it soak in for 20 minutes. Rub in with our hand pads or single-disc polishing machine, and wipe dry with cotton cloths (see below for everything, or alternatively here for the full range of special polishing pads for Woca oil...).

After 6-8 hours, buff the treated surface with a small amount of Master Colour Oil (colour or natural, whichever you prefer) to fully saturate the wood.

Consumption: 1 liter per ± 10m²
Drying time: approx. 24 hours

Apply manually:
1. Apply with our paint rollers or brushes (see related products below). Apply color oil evenly to a maximum of 5 m² of floor surface. Under no circumstances use a cheap roller or brush from a hardware store; this will not produce a good result.
Continue distributing the oil for 20-25 minutes to ensure no dry spots remain and an even, thin glossy layer forms everywhere. Pay extra attention to knots and other highly absorbent areas. Depending on the type of wood, the consumption is approximately 1 liter of oil for 10-15 m².
2. Next, rub the oil into the wood with a green or red pad until the wood pores are saturated and the floor no longer absorbs oil.
3. Now rub the treated surface of the floor thoroughly dry with our cotton cloths (see below again). The floor may be walked on during these works. However, always wipe away footprints immediately.

• 1-View all colors neatly together here...
• 2-NEW: HERE YOU WILL FIND ALL INSTRUCTION VIDEOS FOR ALL WOCA PRODUCTS...
• 3-TECHNICAL INFORMATION..
• 4-BROCHURE..
• -CLICK HERE FOR THE WOCA MAINTENANCE PLAN-

Cleaning and maintenance,

1. Annually: Apply Woca maintenance oil for protection and nourishment.

2. Monthly / every two months: treat with Woca Natural Soap. Natural Soap forms a protective layer on the surface, resulting in less wear and tear, stains, etc.

3. Weekly or as often as you like: Mop the floor as usual with the Eco Multi Cleaner. This removes all dirt, keeps the floor wonderfully fresh and clean, and prevents damage from caked-on dirt, stains, rings, etc.

4. You can easily order these materials here...