Lecol Step Stop OH 36 ACTION
- Buy 3 for €16,72 each and save 1%
- Buy 12 for €16,55 each and save 2%
- Buy 60 for €16,38 each and save 3%
| Article number: | 10580 |
| EAN: | 4014701019427 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
Lecol Step Stop OH36,
Lecol Step Stop OH36 is a high-quality solvent-based liquid wax with anti-slip effect. It protects, maintains and waxes the floor at the same time. The floor can be fully loaded with the highest gloss effect and is easy to rub out.
- Nourish and maintain with 1 product
- Consumption: 1-2 liters per 100 m2
- For best results, first clean the floor with Lecol wax remover OH34
Before applying, you must first clean the floor completely with Lecol wax remover OH34. Do you want a weekly treatment? then it is best to do this with Lecol Wax Clean OH32 .
Instructions,
You apply Lecol Step-Stop OH36 to a dry floor with the special wax cloth from the Opti Set, or a special wax distributor. When feeding in between, it is intended that you spray the floor very thinly with Lecol Step-Stop OH36 and then immediately buff with a buffing machine with a beige or white pad until a nice shine is created. Always scrub immediately after drying! Treating your floor with Lecol OH36 is recommended 3-6 times a year, depending on the intensity of use.
After the floor has been treated with Lecol OH36 it takes about 30 minutes to dry completely. Highly flammable vapors are generated when using this product. Open fire, smoking and hot lamps are therefore strongly discouraged. Good ventilation is also very important. In addition, electrical appliances that get hot when they are switched on must be switched off in time so that they are cold when you start using the Lecol OH36.
Close the packaging tightly after use and keep it closed. Keep out of reach of children. It is important that you are careful when storing used cloths or pads, so always submerge them in water and seal them airtight and store them outside !
Specifications Lecol Step-Stop OH36
- Consumption: After thorough cleaning 1 - 2 liters for 100 m2
- Cleaning tools: Lecol wax remover OH34
maintain and clean,
From now on you can also mop and clean a wash floor weekly with the Eco Multi Cleaner (see below),
This is also very important because otherwise layers of dirt will build up and the floor will wear much faster. It is also better to use the OH32 from Lecol for extra maintenance and protection, but please note that it does not replace the function of the Eco Multi Cleaner
-CLICK HERE FOR THE ONLY RIGHT MAINTENANCE PLAN FOR ALL LECOL/LEHA WASHING/OIL FLOORS...
