Loba Lobadur WS Easyfinish 1k
| Article number: | 11063 |
| EAN: | 4014701617678 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Hout Afwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 300.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Lobadur WS Easyfinish 1K,
Lobadur® WS EasyFinish Mat is a water-based 1K parquet lacquer for heavy loads. Proven over millions of m², this lacquer is comparable to 2K products in terms of durability. Elastic, good chemical and abrasion resistance.
1K water-based parquet varnish with 2K performance. Safe application and excellent resistance. A sustainability talent: with renewable raw materials and very low emissions, it offers high CO₂ savings compared to the industry standard European Polymer Dispersion and Latex Association (EPDLA).
• 2K performance in a practical 1K system
• Lasting beauty – high resistance to mechanical wear and household chemicals
• LOBA Easy-Handling technology
• Based on 35% renewable raw materials
• 25% CO₂ savings compared to the industry standard
• Very low emission, EMICODE® EC1 Plus
• Free from PFAS, plasticizers, and SVHCs
• In combination with LOBA SportCare or LOBA Refresh, meets the requirements for slip resistance in accordance with DIN 18032 for sports floors.
• Meets BREEAM requirements regarding emissions for a healthy indoor climate.
• Packaging made of 100% post-consumer recycled plastic
• Suitable for parquet, wooden, and cork floors.
Drying time Lobadur WS Easyfinish 1K,
- Recoatable after at least 4-6 hours.
- Carefully passable after 4-6 hours.
- Intermediate sanding after at least 8-10 hours.
- Light load after 24 hours.
- Fully loadable and covered after 5 days.
- Suitable for parquet, wooden, and cork floors.
- Consumption: 1 liter for 8-10 m²
Instructions for use Lobadur WS Easyfinish 1K,
• Prepare the surface by removing dust and, if necessary, applying Easyprime primer.
• Observe the prescribed drying time of the primer.
• Roll on the paint with the special paint roller shown below.
• Let dry according to instructions.
• Intermediate sanding with multi-hole disc..
• Roll the second coat of paint in the same way as the first.
For minimizing edge banding and isolating wood constituents, for example in exotic wood species.
--BROCHURE + INFORMATION... Satin
