Lobadur WS Easyprime,

Seamless, water-based insulating primer for virtually all types of wood

Lobadur® WS EasyPrime is a water-based polyurethane roller and spatula primer for parquet. This versatile primer dries very quickly. It offers maximum reliability through seamless application, even on delicate wood types.

Benefits of Lobadur WS EasyPrime,

• Applied on millions of m² worldwide every year
• Universal talent with maximum certainty in processing
• Premium quality at a reasonable price
• Optimizes adhesion between wood and lacquer
• Reduces edge banding

Can be overcoated at the earliest after approx. 60 min.; after 30 min. when spatulating, however within 24 hours. In case of drying disturbances, wait for complete drying.

Lobadur® WS EasyPrime is suitable for virtually all European and exotic wood species. Observe the Loba wood species list. In case of doubt, consultation is necessary. The edge-bonding effect of water-based varnishes is reduced. With professionally installed, impact-resistant to firmly elastically bonded parquet and wooden floors, no block bonding occurs.

Available in 1 liter and 5 liters. This is the 5-liter variant.

Information Lobadur WS EasyPrime,

The Lobadur WS Easyprime has truly unique flow properties, allowing it to be applied as if it were a varnish. The primer flows like water, making it very easy to work with and minimizing brush marks. As a result, you achieve perfect results even on irregularly absorbent wood types such as beech and maple.

The final result looks fuller because this primer penetrates deeper into the wood, the risk of brush marks is extremely low, and an excellent result is guaranteed. The basis for this lies in the fact that, unlike normal primers, this product forms a film layer.
The result of this is good insulating properties. The use of different primers for different types of wood is a thing of the past; the Primer is optimally suitable for all common types of wood.

Intermediate sanding Lobadur WS EasyPrime,

Do not sand between coats of the primer. If the film thickness is sufficient (1 full coat applied with the special paint roller shown below, on slightly absorbent substrates), the surface can be sanded between coats using a single-disc machine in combination with fine sandpaper starting from grit 220. Carefully remove dust before applying the topcoat.

--BROCHURE + INFORMATION...