Bona Polish Remover
| Article number: | 11014 |
| EAN: | 7312792927254 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Hout Afwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 300.000+ tevreden klanten
Bona Polish Remover,
Bona Remover is a concentrated polish remover with a balanced pH value for safely removing old polish layers from wooden floors. Also suitable for removing rubber and shoe marks. Low-foaming and odorless. Formulated for wooden floors but also suitable for use on most types of water-resistant floors, such as tiles, vinyl, and linoleum.
• Balanced product for safe use on wooden floors
• Effective for removing Bona Polish and many similar products
• Concentrated
Bona Polish Remover is a concentrated liquid product for removing polish from lacquered wooden floors, specially developed for Bona Polish and Bona Freshen Up.
Also suitable for removing streaks.
Remover removes old polish layers. With every polishing treatment, a new layer of polish forms. After application a few times, the floor starts to look less attractive, and when buffing no longer yields results, it is time to remove the old polish using this remover.
Properties of Bona Polish Remover,
• specially developed for lacquered wooden floors
• suitable for both residential and public buildings
• removes Bona Polish, Bona Freshen up, D509 and similar products
• easy to use
Contents 1 Liter
INSTRUCTIONS FOR USE Bona Polish Remover,
1. Apply the diluted product to a section of the floor with a mop. Let the product sit for approximately 5 minutes to allow the polish to dissolve.
2. Polish that section with a floor polisher with a red or green pad.
3. Immediately remove the dissolved polish with a wet/dry vacuum or the Bona PowerScrubber. Alternatively, a mop and a bucket of clean water can be used.
4. It may be necessary to reapply Bona Remover several times; this depends on how thick the built-up old polish layers are.
5. When the entire floor has been treated section by section, clean again with clean water only. It is very important that all traces of Bona Remover are removed before applying a new layer of Bona Polish or Bona Refresher.
Note: the amount of water applied to the floor must be kept to a minimum. Watch out for cracks/openings in the floor – do not allow excessive amounts of cleaning solution to seep into them.
REMOVING STRETCHES ETC.
Mix a 20% concentrate in a spray bottle. Spray the diluted product onto the affected area and let it sit for a few minutes. Scrub the stain/streak with a mild, non-abrasive pad (white or red) and then wipe the floor with a soft, clean cloth.
