• Verzendkosten € 6,95 (gratis va €50,-)
  • Scherpste prijzen tot wel 70% korting !
  • Veilig kopen met CBW keurmerk
Bona PU filler 250ml (PVC repair)
PU filler 250ml (PVC repair) €89,95 €100,00

Bona PU filler 250ml (PVC repair)

Sale
€100,00 €89,95 (incl. btw)
(excl. btw €74,34)
In stock: Ordered before 18 is shipped today
Article number: 14668
EAN: 7312793250603
  • Mo/Fr ordered before 18.00 is shipped directly
  • Laagste prijs tot wel 75% korting !
  • Houtafwerkingsspecialisten sinds 1976
  • Grootste voorraad van de Benelux (+1000m2)
  • Reeds 200.000+ tevreden klanten
Information

Bona PU filler 250ml (PVC repair),

2-component polyurethane sealant and adhesive. Developed for quick and durable repairs of elastic floors such as PVC/LVT, rubber and linoleum, with excellent adhesion to many materials. Can also be used to glue small pieces of material. The product is resistant to high impact, high temperatures, moisture, many solvents and chemicals.

Advantages,

  • Very fast curing
  • High durability
  • Virtually odorless
  • Excellent bonding properties

Clean the joint, crack or opening to be filled. Cut away loose edges and material and sand that area with suitable abrasive material. Then clean the joint, crack, or opening with ethanol or a similar solvent and let it dry.
We recommend testing the product for suitability for the intended application and purpose before use. Because given the variety of materials, substrates, location and processing conditions, no guarantee can be given for the functionality of the product.

Instructions:

  1. Open the tube and place it in a glue gun. Squeeze the trigger slowly until some material is released.
  2. Fit the mixing nozzle. The mixing nozzle guarantees an even mixing of the 2 components.
  3. Spray out 25-50mm of material and discard.
  4. Then fill the joint/crack/opening. For best results, make a slight "trapping" / slightly more spray than the grout. NOTE: When not filling, allow material to flow out of the mixing spout in short intervals so that the material does not harden in the tip. Leave the mixing spout in place when you have finished filling - the mixing spout closes the cartridge. A new mixing nozzle must be fitted for reuse.
  5. Sand the repaired area with 120-grit abrasive material until the fill is even with the rest of the surface.
  6. Then apply Bona LinoPrime or Bona Pure to the entire surface according to the instruction sheets of these products.

info: --TECHNICAL INFORMATION...

Reviews
No reviews found
Read or write a review
parketenmeer.nl
CBW
By using our website, you agree to the usage of cookies (your privacy is respected) Hide this message More on cookies »
← .    DUE TO LARGE AMOUNT OF ORDER THE DELIVERY TIME IS SET TO 1 TO SEVERAL DAYS . Hide