Uula Farfoil Natural Paint (click here for colors etc)

Uula Farfoil Natural paint for inside and outside,

Exterior paint, covering in 1 layer, completely matt.
Farfoil is a nature-friendly matt paint for outside. With one coat of Farfoil you get a nice matt surface that protects your woodwork for five years.
The paint consists of boiled linseed oil and ochre, earth dyes and recycled titanium white are used as colorant. Farfoil contains approx. 10% aromatic-free solvent. Farfoil has an unlimited shelf life, is ready to use and smells pleasant. Dilution and cleaning tools: gum turpentine.

Applications
Farfoil is very suitable for the woodwork of houses and barns. You can use it on wooden facades, frames, doors, windows, fences and pergolas. Farfoil has the advantage that it can be applied over old weathered layers of paint. In addition, painting the visible side is sufficient. One coat already provides excellent coverage.

Instructions
Make the surface clean, grease-free and load-bearing. Stir Farfoil well and dilute it with turpentine if necessary. Use a special Farfoil brush or a fur roller to apply Farfoil.

New wood: Remove loose parts and dust. For wood species with limited outdoor durability (spruce, pine, etc.), it may be advisable to pre-treat with Uula Houtgrondeer wv Apply one coat of Farfoil undiluted after drying (4-24 hours).

Old (partly) bare wood: clean old latex or paint layers with Kiruna Cleaner. Let the wood dry for at least 24 hours. Then apply one coat of Farfoil undiluted on a clean surface.

Old painted wood: remove loose layers of paint and clean the woodwork with Kiruna Cleaner. Let the wood dry for at least 24 hours. Then apply one coat of Farfoil undiluted.

Wood painted with cooking paint: brush the woodwork dry or use a pressure washer. Let the wood dry for at least 24 hours and then apply one coat of undiluted Farfoil.

If you are not sure about the right method, ask Uula Natuurverf for advice. We like to help you!

Drying time
Farfoil is dust-dry after approx. 8 hours. Can be painted over (usually not necessary) after a minimum of 72 hours

Efficiency
Raw wood: approx. 5 m2 per litre.
Planed wood: approx. 7 m2 per litre

Packaging
Farfoil White: 0.9, 2.7 and 9 litres.
Farfoil Color: minimum 0.9, 2.7 and 9 litres.
Increased content by adding color.
Note *6000 Sini and 8210 Misteli are no longer available in Farfoil!
 
Precautions
Keep Farfoil in sealed container out of reach of children and animals. Dispose of leftovers via the municipal depot for Small Chemical Waste.

PLEASE NOTE, There are 3 price groups for this Uula Farfoil, where the lowest price is for WHITE and a color is slightly more expensive, roughly the darker the more expensive because then more color pigment is needed to make black, for example, see the price list at the top , and choose your color from the photo, ps the last photos show the price groups, there you can see which price group falls under which color.

IF YOU TAKE WHITE JUST ENTER 00 WHITE IN THE FIELD.

--TECHNICAL INFORMATION...

PLEASE NOTE: 6000 Sini and 8210 Misteli are no longer available in Farfoil!