Auro 123 Hard Wood Oil
Article number: | 12414 |
EAN: | 4012561123377 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
Auro Hard Wood Oil 123,
Solvent-free hard wood oil, to be used as a base and top layer on floors (wood, cork) indoors. Transparent, light honey shade. Can be colored with Auro 'oil mixing colors no. 150' (click here)
A transparent oil for surfaces that are used intensively indoors, for example in the living room. Easily applicable, for robust, honey-coloured surfaces such as oak and hardwoods (even chipwood). Oiled floors treated with PurSolid hard oil get a refined 'more intense' color and long-lasting protection thanks to deep penetration. and to make it completely strong, the floor can be finished with Auro wax (171) (click here)
- Also for wooden furniture
- Solvent-free
- High wear resistance
- Consumption approx. 25m2 p/l
Short manual
- Apply with brush, oil roller or wool cover
- Wipe off unabsorbed product residues with a dry cloth, resp. rub in: within 30 min.
- Dust dry: after approx. 10 hours
- Can be painted over: after approx. 24 hours
Instructions,
1, Only apply the Auro oil with the special paint roller and/or brushes below,
2, Scrub these well with the polishing pads of your choice in the color red or beige.
3, After half an hour, scrub it out with a beige or white polishing pad.
Finally, you can wipe everything dry with the cotton cloths to remove excess, but this is not always necessary.
So make sure that you always work with every oil in this way and that you do not skip all important steps and only work with cloths, this ensures that on balance far too little oil is applied and the floor or it becomes less beautiful. and much less well protected, so that you get spots and bald spots faster and therefore have to apply oil again.
See below all necessary items to apply this oil correctly.